Seitron CHEMIST 600 - Page 78

78
K600000000SE 030804 011018
CONTEXT KEY FUNCTION
Enters the modification mode for the selected parameter.
It is possible to select the number of the memory to use for the
combustion analysis and/or to enter the information relative to the plant.
Recall memory. By activating this function, the user has the possibility to
view the data present in the selected memory.
SEE SECTION 11.4.1.
Search function. Thanks to this function, the user has the possibility to
quickly search for a specific analysis. The search can be carried out
considering the memory number (by selecting the parameter "Memory"),
the customer (by selecting one of the following parameters: "Customer",
"Address", "Telephone" or "Generator") or the date (by selecting the
parameter "Date").
Confirms the settings and, if the search function is enabled, it starts the
research.
In "Edit text" it confirms the input of the selected letter or number.
In "Edit text" it cancels the letter or number that precedes the cursor.
In "Edit text" it goes from uppercase to lowercase, to symbols, to special
characters.
Selects the memories within the range of the research carried out.
Selects the memories within the range of the research carried out.
11.4 Memory Menu→Select
OK
Memory
Select
15/01/14
10:00
Address
Boiler
xxxx
Phone
Memory
Select
15/01/14
10:00
Customer
Seitron
Memory
1
Address
Via del Commercio
n° 9/11
Phone
0424 567842
Mussolente
Boiler
xxxx
Date
15/01/14
▼
▲
Aa#
KEY FUNCTION
Activate the context keys shown on the display.
In "edit text"/"search for data"/"search for memory number": it moves the
cursor on the box corresponding to the desired letter or number.
Selects line; the selected line is displayed in red.
Activates the context key located in the left side of the display.
Returns to the previous screen without saving the changes made.
Memory number
Customer
Customer address
Telephone number
Boiler model
Analysis data
Boiler model
Customer address
Telephone number