EasyManua.ls Logo

Seko SAM 5-ME - Coupler Pump Oil Change Procedure

Seko SAM 5-ME
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
The liquid used and collected must not be
disposed of in the environment, because
according to the laws in force it is defined as
special waste and as such should be consigned
to bodies authorised for the gathering, storage
and disposal of these waste products. Consult
the nearest ASSOCIATION FOR USED OIL.
11) Changing the oil of the coupler pump (Fig. 61-Fig.
62)
To change the oil of the coupler pump proceed as follows:
x unscrew the drain plug (1) after having placed a tray
underneath to collect the used oil;
x remove the graduated rod (2);
x let the oil drain out completely;
x screw the drain plug (1) back on and fill up from the
hole which houses the graduated rod; use the rod to
check the exact oil level.
x Use oil of the same type and characteristics as that
used before.
The liquid used and collected must not be
disposed of in the environment, because
according to the laws in force it is defined as
special waste and as such should be consigned
to bodies authorised for the gathering, storage
and disposal of these waste products. Consult
the nearest ASSOCIATION FOR USED OIL.
Fig. 61
Fig. 62

Related product manuals