Sekonic SR-3500 - Setting Paper Weight for Double Feed

-45-
3.
Use the
UP
and
DOWN
switches to select [Wait Time for Form] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
MENU
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
*The hopper table goes up and kept at the upper position if the manual mode is
selected. The hopper dose not go down if the
DOWN
switch is pressed.
Wait time for form
setting values
• None
• 1-99S
Data reading settings

Setting hopper mode
SR-3565(E).indd45SR-3565(E).indd45 2007-8-1610:19:432007-8-1610:19:43