Sekonic SR-3500 - Printer Unit Preparation

-85-
1.
Printing after reading marks
The printable area is a maximum of 230mm from the bottom edge of a sheet.
[When sheet size is (L > 233)mm]
2mm (W-4) mm
(L-230) mm
(230-3) mm
3mm
ABCD...
Sheet feeding direction
Timing mark side
2mm
[When sheet size is (L < 233)mm]
2mm (W-4) mm
(L-6) mm
3mm
3mm
2mm
Sheet feeding direction
Timing mark side
2.
Printing while reading marks at the same time
The overall area can be printed regardless of the sheet size.
2mm (W-4) mm
(L-6) mm
3mm
3mm
2mm
Sheet feeding direction
Timing mark side

1:The number of characters until it stops being printed dpend on working condition.

2:The size of printable area depends on the size of the sheet used.
Options Printrer unit

Printable area
SR-3565(E).indd85SR-3565(E).indd85 2007-8-1610:21:012007-8-1610:21:01