508.366.1488 | www.semshred.com
15
3. When taking the bag out of the drum, handle it carefully to prevent spilling its contents.
Figure 4. Drum and drum table
Figure 5. Plastic bag inserted in the drum
Note: The drum table (Figure 4) fits inside the drum to support the waste bag.
4. Insert the plastic waste bag inside the drum. Open and spread out the bag to the drum corners and
edges. Be sure to fully open bag so that it is flush against the side walls of the drum, .
5. With the foot pedal bar raised, align the drum window to the center point of the drum lid (Figure 6A)
and push the drum in (Figure 6B). Lower the foot pedal bar (Figure 6C) to seal the drum tight for normal
machine operation.
To Next Page
Loading...