508.366.1488 | www.semshred.com
3
Disclaimers
Every care has been taken by the staff of SEM in compilation of the data contained in all training and
informational materials (“collateral”) and in verification of its accuracy when published; however, the
content of this collateral is subject to change without notice due to factors outside the control of SEM and
this collateral should therefore be used as a guide only. The products referred to in these publications are
continually improved through further research and development, which may lead to the alteration of
information contained in this collateral. SEM does not accept any responsibility whatsoever for
misrepresentation by any person of the information contained in this collateral and expressly disclaims any
and all liability and responsibility to any person, whether a reader/viewer of this collateral or not, with
respect to claims, losses, damage, or any other matter, either direct or consequential, arising out of or in
relation to the use and reliance upon any information contained or products referred to in this collateral.
SEM does not warrant that the equipment will work properly in all environments and applications, and
makes no warranty or representation, either implied or expressed, with respect to the performance,
throughput, or maintenance requirements of the machine. Performance, throughput, and maintenance
requirements vary depending on screen size, feed rate, and media type as well as operational procedures.
Information in this collateral is subject to change without notice and does not represent a commitment on
the part of SEM. SEM assumes no responsibility for any inaccuracies that may be contained in this collateral
or any omissions that may have occurred. SEM makes no commitment to update or keep current the
information in this collateral and reserves the right to make improvements to this collateral and/or to the
products described therein at any time without notice.
Proprietary Information: This document contains proprietary and confidential information of SEM, and shall
not be used, disclosed, or reproduced, in whole or in part, for any purpose, without the prior written
consent of SEM. Title in and to this document and all information contained herein remains at all times in
SEM. This information is exempted from disclosure under FOIA, as amended.
To Next Page
Loading...