R1 Smart Cycling Helmet | 13
1 ABOUT THE R1 SMART CYCLING HELMET
MENU
WARNING
• For maximum protection, the helmet must fit properly on the
head and its chinstrap securely fastened under the chin. With
the retention system comfortably but firmly adjusted, the helmet
should allow sufficient peripheral vision when secured. If the
helmet is too large, it may move on your head while riding. If the
helmet can be moved when pulled from the back in an upward and
forward direction, then the helmet is not fitted properly. This could
cause the helmet to obstruct your vision while riding or come off
in an accident, resulting in personal injury or death. Please refer
to Section 1.4: “Wearing the Helmet” for more details about
properly securing and wearing your helmet.
• The contents of this helmet User’s Guide are subject to change
without notice. Its illustrations may differ from the actual product.
The copyrights for the User’s Guide belong to Sena Technologies,
Inc. Reproduction or copying of the User’s Guide without
permission is strictly prohibited.
For United States Consumers, this helmet has been tested and certified
to meet and exceed the Bicycle Safety Standard for Bicycle Helmets,
16 CFR Part 1203. A copy of this regulation can be obtained by visiting
CPSC.gov. For European Consumers, this helmet has been tested and
certified to meet and exceed European Committee for Standardization,
CE EN1078. A copy of this regulation can be obtained by visiting CEN.
eu.
To Next Page
Loading...
Need help?
General
