R1 Smart Cycling Helmet | 70
CERTIFICATION AND SAFETY APPROVALS
MENU
Helmet Certification
This product conforms to the Bicycle Safety Standard for Bicycle Helmets, CE
EN1078 defined by the European Committee for Standardization. The certification
CE EN1078 certification applies to Europe.
Sena Technologies, Inc.
19, Heolleung-ro 569-gil,
Gangnam-gu Seoul 06376 Korea
Email: support@sena.com
www
.sena.com
This product conforms to the Bicycle Safety Standard for Bicycle Helmets, C.P.S.C.
16 CFR Part 1203 helmet safety standards defined by the United States Consumer
Product Safety Commission. The certification C.P.S.C. 16 CFR Part 1203 applies to
the United States of America. The approval label can be affixed permanently to the
inside of the helmet (United States).
Made in China
Do not remove or attempt to remove the approval label from the helmet. Do not
affix approval labels of unknown origin to the helmet. These are more than likely
counterfeit labels. It is against the law to affix counterfeit labels to helmets. If you
are in any doubt over the origin of the approval label affixed to your helmet contact
Sena directly, and not your dealer.
To Next Page
Loading...
Need help?
General
