Sena SF Series User Manual

SF Series
11
English
2. While pushing the latch at the center of the clamp kit, push the
back plate of the clamp kit outwards to remove it.
1
2
3. Align the glued surface mounting adapter and the back of the
clamp kit and slide the adapter into the clamp kit until you hear a
click. Make sure that the glued surface mounting adapter ts the
back of the clamp kit’s grooves.
3.1.2 Using the Glued Surface Mounting Adapter for the Main
Unit
If the clamp kit is not inserted into the helmet rmly, you can use the
glued surface mounting adapter.
1. Make sure that the main unit is separated from the clamp kit. If
not, push and hold the clamp kit’s tab upwards and remove the
main unit from the clamp kit.
1
2

Sena SF Series Specifications

General

Bluetooth	Bluetooth 4.1
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Intercom Connections	Up to 4 riders
Audio Multitasking	Yes
FM Radio	Yes
Audio Codec	SBC