Sena SF Series User Manual

SF Series
42
14.3 GPS Pairing
Voice Prompt
“GPS pairing”
Factory Default N/A
To go into GPS pairing mode, tap the (+) Button or the (-) Button until
you hear the voice prompt, “GPS pairing”. Please refer section 6.3.1,
“GPS Pairing” for details on GPS pairing. If you tap the (+) Button or
the (-) Button, you can exit from the GPS pairing mode.
14.4 Phone Selective Pairing
Voice Prompt
“Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone selective pairing”.
Please refer to
section 5.3.2, “HFP for Phone Call Only” for details on
phone selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the phone selective pairing mode.
14.5 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Media selective pairing”.
Please refer section 5.3.1, “A2DP Stereo Music Only” for details on
media selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the media selective pairing mode.
14.6 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Center Button
To delete all Bluetooth pairing information of the SF Series, tap the (+)
Button or the (-) Button until you hear a voice prompt, “Delete all
pairings”, and tap the Center Button to conrm.

Sena SF Series Specifications

General

Bluetooth	Bluetooth 4.1
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Intercom Connections	Up to 4 riders
Audio Multitasking	Yes
FM Radio	Yes
Audio Codec	SBC