SF Series
17
English
5 PAIRING THE SF SERIES WITH
BLUETOOTH DEVICES
Before using the SF Series Bluetooth headset with any other Bluetooth
devices for the rst time, you will need to pair them together. You can
pair the SF Series with Bluetooth mobile phones, Bluetooth stereo
devices such as MP3 players, or motorcycle specic Bluetooth GPS
navigation, and with other Sena Bluetooth headsets. The pairing
operation is required only once for each Bluetooth device. The headset
remains paired with the devices and automatically reconnects to them
when they are within range. You will hear a high-toned single beep and
a voice prompt whenever the headset reconnects to the paired device:
“Phone connected” to a mobile phone, “Media connected” to a
Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Conguration menu”.
2. By tapping the (+) Button, you will hear the voice prompt, “Phone
pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
Sena SF Series in the list of the devices detected on the mobile
phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. The mobile phone conrms that pairing has completed and the
SF Series are ready to use. You will hear a voice prompt, “Your
headset is paired”.
6. If the pairing process is not completed within three minutes, the
SF Series will return to stand-by mode.
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the Center Button for 3 seconds until you hear a
high-toned single beep to recover the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the Center Button for 1 second to recover the
Bluetooth connection and play.
To Next Page
Loading...
Need help?
General
