SF Series
19
English
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the SF Series for A2DP stereo music only or for mobile
phone handsfree only. These instructions are for advanced users who
want to pair the SF Series to their smartphones with only one selective
prole: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SF Series, you
must clear the previous pairing list on both devices: the mobile phone
and the SF Series. To clear the pairing list on the SF Series, please do
a factory reset or following the pairing list clearing procedure
described in
section 14.9, “Factory Reset”
or
14.6, “Delete All
Bluetooth Pairing Information”
. To clear the pairing list on the mobile
phone, please refer to
the mobile phone manual
. For most smartphones,
delete the Sena SF Series from the list of Bluetooth devices in the
settings menu.
5.3.1 A2DP Stereo Music Only
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Conguration menu”.
2. Tap the (+) Button until you hear the voice prompt, “Media
selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.3.2 HFP for Phone Call Only
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Conguration menu”.
2. Tap the (+) Button until you hear the voice prompt, “Phone
selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
To Next Page
Loading...
Need help?
General
