Sena SF Series User Manual

SF Series
43
English
14.7 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the Center Button
To enter into remote control pairing mode, tap the (+) Button or the (-)
Button until you hear a voice prompt, “Remote control pairing”. Then
tap the Center Button to enter into remote control pairing mode. The
headset will automatically exit from the conguration menu.
14.8 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Center Button
To enter into universal intercom pairing mode, tap the (+) Button or the
(-) Button until you hear a voice prompt, “Universal intercom pairing”.
Then tap the Center Button to enter into universal intercom pairing
mode. The headset will automatically exit from the conguration menu.
14.9 Factory Reset
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Tap the Center Button
To restore factory default settings on the SF Series, tap the (+) Button
or the (-) Button until you hear a voice prompt, “Factory reset”, and
tap the Center Button to conrm. The SF Series power off with a voice
prompt, “Headset reset, goodbye”.
14.10 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Center Button
To exit voice conguration menu and get back to stand-by mode, tap
the (+) Button or the (-) Button until you hear a voice prompt, “Exit
conguration”, and tap the Center Button to conrm.

Sena SF Series Specifications

General

Bluetooth	Bluetooth 4.1
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Intercom Connections	Up to 4 riders
Audio Multitasking	Yes
FM Radio	Yes
Audio Codec	SBC