Sena SF Series User Manual

SF Series
10
3 INSTALLING THE SF SERIES ON YOUR
HELMET
3.1 Installing the Main Unit
3.1.1 Installing the Clamp Kit to the Main Unit
1. Push and hold the clamp kit’s tab upwards. While pushing the tab,
insert the main unit into the clamp kit.
1
2
2. Insert the back plate of the clamp kit between the internal padding
and external shell on the left side of the helmet.

Sena SF Series Specifications

General

Bluetooth	Bluetooth 4.1
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Intercom Connections	Up to 4 riders
Audio Multitasking	Yes
FM Radio	Yes
Audio Codec	SBC