SPIDER ST1 Motorcycle Mesh Communication System | 11
2 INSTALLING THE HEADSET ON YOUR HELMET
Note: You can use the boom microphone holder after attaching
the hook and loop fastener for boom microphone holder on it to
ensure secure installation.
3. Adjust the head of the microphone so that the tab is facing away from
your mouth.
Tab
Note: Make sure that the microphone is located properly close
to your mouth when you wear the helmet. Adjust the direction of
the microphone so that the fin side of the microphone is facing
outward, away from your lips.
Fin
4. Align the arrows on the microphone and speaker cables and insert
the microphone cable into the microphone connector.
To Next Page
Loading...
