Sena SPIDER ST1 - Charging; Legend

SPIDER ST1 Motorcycle Mesh Communication System | 15
3 GETTING STARTED
3.2 Charging
Charging the Headset
Depending upon the
charging method, the
headset will be fully
charged in about 2.5 hours.
Note:
• The headset includes a Fast Charging feature which allows it to
charge quickly over a short period of time. For example, a user
can get up to 2.0 hours of Mesh communication after charging the
headset for 20 minutes.
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC, or other locally
approved agencies.
• Use of a non-approved charger may cause fire, explosion,
leakage, and other hazards which may also reduce the life time or
performance of the battery.
• The SPIDER ST1 is compatible with 5 V input USB-charged devices
only.
3.3 Legend
1x
TAP
Tap button/Jog Dial the
specified number of times
10s
HOLD
Press and Hold button/Jog
Dial for the specified amount
of time
ROTATE
L
ROTATE
R
ROTATE
Rotate Jog Dial clockwise (right) or
counterclockwise (left).
ROTATE
L
ROTATE
R
ROTATE
Rotate while Pressing Jog Dial clockwise (right) or
counterclockwise (left).
“Hello”
Audible prompt