SPIDER ST1 Motorcycle Mesh Communication System | 17
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, or MP3 player via Mobile Phone Pairing, Second Mobile
Phone Pairing and GPS Pairing.
Mobile
Phone
MP3
Player
GPS
Devices
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the SPIDER ST1
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset.
1. Press and hold the Phone Button and the Jog Dial for 1 second.
=
1s
HOLD
Blinking
“Phone pairing”
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Phone Button or Jog Dial.
CHAPTER
To Next Page
Loading...
