SPIDER ST1 Motorcycle Mesh Communication System | 9
2 INSTALLING THE HEADSET ON YOUR HELMET
2. Peel off the cover of the adhesive tape of the glued surface mounting
plate and attach it to the helmet.
3. Make sure that the glued surface mounting plate sticks on the helmet
firmly. Maximum adhesion occurs after 24 hours.
4. Attach the main unit to the glued surface mounting plate until you
hear a click.
2.2 Installing the Speakers
1. Peel off each cover of the hook and loop fasteners for speakers to
expose the adhesive surface. Then, attach the fasteners to the ear
pockets inside the helmet.
To Next Page
Loading...
