Sena SPIDER ST1 - Powering on and off; Volume Adjustment; Checking the Battery Level

SPIDER ST1 Motorcycle Mesh Communication System | 16
3 GETTING STARTED
3.4 Powering On and Off
Powering On
=
1s
HOLD
Powering Off
=
1x
TAP
3.5 Volume Adjustment
You can raise or lower the volume by rotating the Jog Dial clockwise
or counterclockwise. Volume is set and maintained independently at
different levels for each audio source (i.e., phone, intercom), even when
the headset is rebooted.
Volume Up
=
ROTATE
R
Volume Down
=
ROTATE
L
3.6 Checking the Battery Level
Instructions are for when powering the headset on.
Powering On
=
1s
HOLD
=
=
=
Note: When the battery is low while in use, you will hear a voice
prompt saying “Low battery”.