Sena SPIDER ST1 - Second Mobile Phone Pairing - Second Mobile Phone and GPS; GPS Pairing

SPIDER ST1 Motorcycle Mesh Communication System | 19
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.2 Second Mobile Phone Pairing - Second Mobile
Phone and GPS
1. Press and hold the Jog Dial for 5 seconds.
=
5s
HOLD
“ Configuration
menu”
2. Rotate the Jog Dial clockwise until you hear a voice prompt, “Second
mobile phone pairing”.
=
ROTATE
R
Blinking
“ Second mobile
phone pairing”
3. Select SPIDER ST1 in the list of
Bluetooth devices detected. If your
Bluetooth device asks for a PIN,
enter 0000.
Device B
Pi
Bluetooth
SPIDER ST1
4.3 GPS Pairing
1. Press and hold the Jog Dial for 5 seconds.
=
5s
HOLD
“ Configuration menu”
2. Rotate the Jog Dial clockwise until you hear a voice prompt, “GPS
Pairing”.
=
ROTATE
R
Blinking
“ GPS pairing”
3. Select SPIDER ST1 in the list of
devices detected. If your Bluetooth
device asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
SPIDER ST1
Note: If you pair your GPS device via GPS Pairing, its instruction will
interrupt your Mesh Intercom conversations.