9
OPTIONAL ACCESSORIES
1. Test Lead Adapter (39G144) – Use to adapt Out-
of-Circuit Test Leads to large, screw terminal
capacitors.
2. 220 VAC Power Adapter/Charger (PA252) –
Plugs into POWER INPUT to power the unit from
210-230 VAC line. Also recharges the (optional)
BY289 battery when installed inside the LC103.
3. Touch Test Probe (39D85) – Use for Hi-Pot testing
of circuit board traces.
4. Field Calibrator (FC221)) – Use to periodically
check the calibration of the LC103.
5. Rechargeable Battery (BY289) – Lead acid battery
provides portable operation for the LC103.
6. SCR/TRIAC Test Accessory (SCR260) – Use to
test SCRs and TRAICs.
7. Carrying Case (CC254) – Provides protection and
easy carrying for the LC103 and its accessories.
8. Component Holder (CH255) – Use to hold
components for fast tests when doing volume
testing.
9. Chip Component Test Lead (CH256) – Special
shielded test leads for testing small surface mount
(chip) components out-of-circuit.
Fig. 4: Optional Accessories
To Next Page
Loading...
Need help?
General
