Sennheiser HE 1 - Adjusting the Signal Levels of the INPUT Audio Inputs

33
Using the HE 1 | Adjusting the signal levels of the INPUT audio inputs
Adjusting the signal levels of the INPUT audio inputs
Depending on the device used or your listening preferences, you can adjust the
volume/signal levels of the audio inputs so that e.g. all devices used with the
HE 1 are reproduced at the same volume. This allows you to use the complete
adjustment range of the volume control for all audio inputs.
1. Select the desired INPUT audio source and start playing music from the
selected device.
2. If your selected device is tted with an adjustable output (e.g. headphone
output), adjust the output volume to at least a medium level.
3. Adjust the listening volume on the HE 1 to a medium level that is
comfortable for you. This volume level becomes the reference level for the
center position of the volume control.
4. Press and hold the - button and the + button on the remote control for
2 seconds.
The status LED ashes green. The signal level for the audio input is stored.
The volume control automatically returns to the center position so that you
can use the complete volume range for the selected device.
2
INPUT
CROSS FEED
OUTPUT
USB COAXIALOPTICAL
BALANCEDUNBALANCED
LOW HIGHOFF
LINEPHONES
BOX CONTROL
BOX 2 O/CBOX 1 O/C
2 s
4
I
3
1
3
2
4