Sennheiser HE 1 - Adjusting Volume

37
Using the HE 1 | Adjusting the volume
Adjusting the volume
CAUTION
Danger of hearing damage!
Listening at high volume levels for long periods of time can lead to permanent
hearing defects. Toggling between the audio sources may cause enormous
volume jumps that can permanently damage your hearing.
▷ Before putting the headphones on and before switching between audio
sources, adjust the volume to a low level.
▷ Do not continuously expose yourself to high volume levels.
▷ Use the volume control to adjust the desired volume.
Or:
▷ Press the - button or the + button on the remote control until the desired
volume is reached.
The volume setting applies to both the headphones (PHONES) and the audio
outputs (LINE). If you have connected two headphones to the headphone
amplier, the volume setting applies to both headphones. The volume/signal
levels of the INPUT audio input and OUTPUT audio outputs can be adjusted
individually (see page 33 and 36).
Vol +
Vol -
HE 1 erstellt von Vincent
INPUT
CROSS FEED
OUTPUT
USB COAXIALOPTICAL
BALANCEDUNBALANCED
LOW HIGHOFF
LINEPHONES
BOX CONTROL
BOX 2 O/CBOX 1 O/C
Vol +
Vol –
Vol +
Vol –