Sennheiser HE 1 - Using Crossfeed and Selecting Outputs

34
Using the HE 1 | Using the crossfeed function
Using the crossfeed function
With certain recordings, the bass portion of the music signal is hard-panned to
just one of the stereo channels. Some people will nd such recordings tiring to
listen to using headphones.
This effect can be minimized by activating the crossfeed function of the HE
1. The crossfeed function feeds the bass portion of the music signal to both
the right and left stereo channel, thus helping to alleviate excessive stereo
separation. This function is only intended for use with headphones. The LINE
output remains unchanged.
▷ Turn the CROSS FEED rotary switch until the desired setting points to the
marking.
Or:
▷ Press the desired CROSS FEED function button on the remote control.
CROSS FEED
rotary switch
Function
OFF
The crossfeed function is deactivated.
The music recording is reproduced unchanged.
LOW
The crossfeed function is activated, the crossfeed intensity
level is low.
The bass portion of the music signal is fed to both the right
and left stereo channel.
HIGH
The crossfeed function is activated, the crossfeed intensity
level is high.
The bass portion of the music signal is fed to both the right
and left stereo channel and is boosted slightly.
INPUT
CROSS FEED
OUTPUT
USB COAXIALOPTICAL
BALANCEDUNBALANCED
LOW HIGHOFF
LINEPHONES
BOX CONTROL