Sennheiser HE 1 - Troubleshooting and Protection; Problem Solving

47
Transporting the HE 1
Transporting the HE 1
Use the original packaging or contact your Sennheiser partner to arrange for
the transport of the HE 1 (see “Contact” on page 4).
1. Place the foam protection a (supplied) in the headphone compartment.
Place the headphones b onto the foam protection. Roll up the cable so that
it ts completely into the storage box and connect the connector of the
headphones to the connection socket.
2. Place the foam protection c onto the headphones.
3. Switch the HE 1 off as normal and then disconnect all cable connections.
4. Place the HE 1 on the base plate of the transport box as shown.
5. Place the lid of the transport box on the base plate and close all 4 clip locks.
OFF
Front
1
2 3
4
5
c
a
b