Sennheiser HE 1 - Muting the Audio

38
Using the HE 1 | Muting the audio
Muting the audio
You can mute the headphones and the audio outputs of the tube headphone
amplier:
▷ Turn the OUTPUT rotary switch until MUTE points to the marking.
Or:
▷ Press the button on the remote control.
The audio is muted. The status LED pulses.
To cancel the muting:
▷ Change the volume (see page 37).
Or:
▷ Turn the OUTPUT rotary switch back to the desired output.
Or:
▷ Press the button on the remote control again or press the desired
OUTPUT audio output on the remote control.
INPUT
CROSS FEED
OUTPUT
USB COAXIALOPTICAL
BALANCEDUNBALANCED
LOW HIGHOFF
LINEPHONES
BOX CONTROL
BOX 2 O/CBOX 1 O/C