Sennheiser HE 1 - Audio Adjustments

35
Using the HE 1 | Selecting the OUTPUT audio output
Selecting the OUTPUT audio output
▷ Turn the OUTPUT rotary switch until the desired audio output points to the
marking.
Or:
▷ Press the desired OUTPUT function button on the remote control.
OUTPUT audio
output
Selected output on the tube headphone amplier
PHONES
The
HE 1-HP electrostatic headphones are selected as
the audio output. The headphones are connected to the
HEADPHONE 1 socket and/or the HEADPHONE 2 socket.
MUTE The audio is muted. The status LED pulses.
LINE
A power amplifier or active loudspeakers are selected
as the audio output. The devices are connected to the
ANALOG OUT sockets.
If the OUTPUT audio output is set to LINE, the headphone storage box
remains closed when the HE 1 is switched on. In this case, open the
storage box manually (see page 39).
INPUT
CROSS FEED
OUTPUT
USB COAXIALOPTICAL
BALANCEDUNBALANCED
LOW HIGHOFF