9
Chapter 1: Installation
CHAPTER 1: INSTALLATION
INTRODUCTION
Congratulations on your purchase of the Sensaphone Web600 Monitoring System. The system is designed to
be an easy, cost–effective, network–based monitoring system to notify you when equipment or conditions go
awry. The internet browser–based programming makes the device easy to use from any computer on your
network. Monitored conditions can include temperature, humidity levels, line voltage, leak detection, UPS
systems, and more. The system allows multiple users to be notified immediately of any detected problems.
Notification can occur via e–mail, SMS (text message) or SNMP trap. An optional battery backup system
(FGD-W610-B) insures that the unit will continue to run if main power fails.
FEATURES
The Web600 includes the following key features:
Q Six sensor inputs to monitor environmental conditions and/or alarm contacts from other computer
equipment such as UPS systems.
Q 10/100BASE-T Ethernet port.
Q Optional battery backup for uninterrupted performance.
Q Compact design allows wall-mount or tabletop installation.
Q Embedded web page to program and manage your Web600 system.
Q Notification via e–mail, SMS (text message) or SNMP trap.
TECHNICAL SUPPORT
If any questions arise upon installation or operation of the Web600, please contact the Sensaphone
Technical Service Department at 610.558.2700 and have the following information available:
t%BUFPGQVSDIBTF@@@@@@@@@@@@@@@@@@
t4FSJBMOVNCFS@@@@@@@@@@@@@@@@@@
Technical support is available from 8:00 AM to 5:00 PM, M-F, eastern time.
ABOUT THIS MANUAL
This manual comprises the instructions and commands necessary to install and program the Web600.
Additional summary and application chapters are included to help you speed programming and to
understand the Web600’s features. You should thoroughly read this manual to establish a basic under-
standing of the system and keep it as a reference.
To Next Page
Loading...
Need help?
General
