senseFly EBEE RTK - Page 10

Hardware features
Top face of the eBee
batter
y compartment
ailer
on
winglet
pr
opeller
servo connectio
n
mechanis
m
data link antenna
pitot pr
obe, status LED
wing
camer
a compartment
central body
Bottom face of
the central body
ground
sensor
camera lens hole
Detachable
wing
wing
struts
GNSS/RTK antenna
The eBee RTK is an autonomous flying drone comprised of the following compo-
nents:
• Central body: This is the core of the eBee RTK and includes all the electron-
ics, actuators and communications hardware on-board the drone.
• Wing: The two wings of the eBee RTK are detachable for storage and re-
placement. Each wing has two wing struts and two clips to hold it in place
within the central body.