Using RTK
3.2 Using your eBee RTK with a virtual reference broadcaster
Step 1 From the eMotion Choose RTK Source menu, select the VRS/Ntrip service
you want to connect to for your flight.
Step 2 If a VRS is created, a base station icon ( ) appears on your map at its
coordinates.
3.3 Using your eBee RTK in standalone mode
If you do not need high-precision absolute image geo-tags, or RTK corrections
from a GNSS/RTK base station or Ntrip broadcaster are not available, you can fly
your eBee RTK in standalone mode.
• From the eMotion Choose RTK Source, choose Standalone.
Now that you have chosen your RTK source, or chosen to fly standalone, you can
plan your mission and launch your real or simulated drone. See section ‘Creating
a new flight plan’ on page 25 to get started).
39
To Next Page
Loading...
