senseFly EBEE RTK - Preparing the Ebee RTK for Flight

Executing a flight
Caution: The eBee RTK should not be launched if the wind speed ex-
ceeds 12 m/s (in other units: 43.2 km/h, 26.8 mph, 23.3 kts).
Caution: The eBee RTK is not designed to fly in temperatures above
35
◦
C. Avoid exposing the drone to high temperature for prolonged
periods of time. In particular, leaving the drone exposed to the sun
or in a car should be avoided.
4.2 Preparing the eBee RTK for flight
The eBee RTK’s simple design means it can go from the box to being ready for flight
in minutes. We recommend that you perform the following 6 steps before every
flight to ensure that the platform is best prepared for flight.
Note: Remove the red warning sticker from the motor before your
first flight.
Central body
bottom view
Central body
top view
Wing - detached
3
4
2
5
6
41