eMotion in-depth guide
Clicking the ‘More’ list will provide further options:
• Save parameters as default in drone: Saves the currently-set flight pa-
rameters to the eBee RTK’s autopilot’s memory.
• Restore factory parameters: Returns the flight parameters to their de-
fault values and automatically sends them to the drone’s autopilot.
The ‘General information’ section displays information specific to your eBee RTK.
This includes the current firmware and bootloader versions loaded into the au-
topilot, the serial numbers of the airframe and the autopilot, the total number of
flights performed by drone and the total time spent in the air.
Note: The flight counter is incremented every time the take-off pro-
cedure is initiated by shaking the eBee RTK back and forth 3 times,
even if take-off is subsequently aborted.
Clicking ‘View flight database...’ will bring up a window that presents a summary
of all the flights performed by the drone using this computer.
139
To Next Page
Loading...
