Troubleshooting
Strong wind
∗
The wind is too strong for the eBee RTK to navigate
safely.
Security action (if enabled): The eBee RTK flies to-
wards the Home waypoint at an altitude defined by
the Home waypoint’s Change altitude parameter (by
default, set to ‘Highest’).
User action: Land as soon as possible and wait for
better flight conditions.
Cannot maintain
altitude
The eBee RTK cannot maintain the altitude that is
commanded by the flight controller. This may be due
to a damaged motor, airframe or ailerons or a strong
vertical wind.
Security action: The drone continues normal flight.
User action: If the condition persists during a flight,
land and wait for the wind to decrease, as explained
in section ‘Weather check’ on page 40. If the prob-
lem occurs in low-wing conditions perform Check 2
in section ‘Full airframe and sensor inspection’ on
page 151.
175
To Next Page
Loading...
