The standard eBee RTK package contains the following items:
• 1x carrying case with foam protection
• 1x eBee RTK central body with built-in autopilot
• 1x pair of detachable wings
• 1x spare propeller
• 10x spare propeller attachment rubber bands
• 2x Lithium-Polymer battery packs
• 1x Lithium-Polymer battery charger (including cables)
• 1x 2.4 GHz USB ground modem for radio data link (including USB cable)
• 1x 2.4 GHz remote control (including including 3 AA batteries)
• 1x modified IXUS/ELPH still camera (including memory card, battery and
charger)
• 1x USB cable for interfacing with camera and on-board autopilot
• 1x EPP glue
• 1x eBee RTK User Manual
• 1x camera User Manual
Depending on your order, your package may also include other items, such as
additional payloads. Please verify upon delivery that your package is complete.
In case of a missing item, please contact your eBee RTK reseller immediately.
Caution: The built-in GNSS receiver in the eBee RTK makes it heavier
than the standard eBee. You must therefore only fly your eBee RTK
with the IXUS/ELPH camera provided. senseFly Ltd cannot be held
responsible for any loss or damage caused by flying an eBee RTK with
a different camera installed.
To Next Page
Loading...
