3. Installation
3.1 Installation Condition
Please install the SOHO VD Power Supply on the places satisfying the following
conditions.
Avoid rain, hot temperature and high humidity place.
Avoid the direct sunlight.
The place should be protected from dirt, metal dust, and welding
flame.
Install so as to be bearable to the vibration.
Defective main power may cause the Power Supply damages.
- Using the same power source with welding machine.
Keep away from flammables.
- Install on the nonflammable materials as steel.
Fasten the terminal screws to the relevant torque value and make
sure that there are not loose terminals.
To Next Page
Loading...