Seoho Electric SOHO PS - Safety Instructions; Storing and Warranty

SOHO Power Supply
2
1.2 SAFETY INSTRUCTIONS
!
1
Do NOT make any connections when SOHO Power Supply is
connected to main voltage.
2
Do NOT make any measurements when SOHO Power Supply is
connected to main voltage.
3
After disconnecting main power, wait until the cooling fan stops
and the indicator on display goes out. Wait a further 5 minutes
before doing any work on SOHO Power Supply connections. Do
NOT open even the cover within this time.
4
Do NOT make any voltage withstand tests on any parts of SOHO
Power Supply
5
Make sure that the cover of SOHO Power Supply is closed before
connecting main voltage.
Ground Warning Sign
The ground terminal of SOHO Power
Supply has to contact with ground
wire.
Ground of SOHO Power Supply prevent
high voltage accidents that are caused by
switching
Please be more cautious for the
following warning signs for user’s safety
= Dangerous Voltage
!
= General Warning
1.3 Storing and Warranty
Check the ambient conditions in the storage room before the first commissioning.
(Temperature: -40℃ ~ +50℃, relative humidity < 95%, no condensation allowed).