EasyManua.ls Logo

Seoho Electric SOHO PS - Specifications

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOHO Power Supply
4
2. Specifications
Items
Specifications
Remark
Rated Input Voltage Range
3Ø 265Vac ~ 480Vac
for regulated output with 230Vac
Max Input Voltage
3Ø 540Vac
within 2sec
Input Frequency Range
30Hz ~ 70Hz
Output Voltage
up to 95% for Input Voltage
before L-C filter
Output Frequency
0 ~ 200Hz
Adjustable(Default 60Hz)
Switching Frequency
0 ~ 8KHz
Adjustable(Default 2.5KHz)
Start-up Voltage
200Vdc
Cut-off Voltage
170Vdc
THD
less than 2%
Under linear load condition
Voltage Drop
less than 15%
Under rated load condition
(include L-C Filter)
Rated Output Power
37KW/18.5KW
440Vac/220Vac
Rated Output Current
72Arms
Under ambient temperature 40°C
Peak Output Current
135Arms
Heat-sink Temperature : less than
65°C
Over Load Capability
150% of rated current
1min/10min
Over Current Trip
250Arms(max)
Adjustable
Feedback Control Method
Load Unbalance Observer
Automatic Mode Exchange
Open loop Control Method
Open-loop Compensator
Protection Function
Over Current, Over Load,
Over Voltage, Under Voltage,
Feedback Line Fail, Low Voltage,
Pre-charging Fault, Short Current. Etc.
User Interface
Keypad (with LCD)
Management Software(Free)
User Connection
8 Digital Input
DI1 : Reserved with Run/Stop
1 Analog Output
Multi Function
3 Digital Output
Multi Function
2 Relay Output
Relay Output 1 : Fault Output
Relay Output 2 : Feedback Line
Fail
Voltage Feedback
R,S,T (from isolation transformer
output)
Communication
CAN, RS-485, Profi-Bus
Optional (RS-232 default : Keypad)
Ambient Temperature
-10°C ~ +40°C
Relative Humidity
90%, no condensation allowed