Getting Started
Power on
To power on, press and hold (2 seconds) the Cancel/Home key.
Your radio attaches to the last selected talkgroup when it is powered off (if it is 'in service'). This is
customisable.
Depending on your radio's customisation any of the following may display:
a company logo
a splash screen
a welcome screen
a PIN entry screen
NOTE: A message may appear if your software licence has or is about to expire.
If your radio supports Radio User Assignment (RUA), which authenticates your radio on the
network, you may be prompted to log on to your network. See Authentication on page68.
Power off
To power off, from the Home screen press and hold (4 seconds) the Cancel/Home key.
Scroll to the Shutdown option, then press the Select key to power off your radio. Before
powering down, alerts and messages may be sent.
If your radio is configured to provide an option to delete Callouts, navigate to Shutdown or Delete
Callouts then press the Select key.
Locking and unlocking the keypad
To prevent accidental activity during operation, you can lock the keypad. This will also prevent
access to the radio's functions if the radio is stolen. When the keypad is locked, the Key icon
appears in the status line.
The keypad can be locked manually or set to lock automatically after a period of inactivity.
NOTE: If customised, your radio's keypad can be locked when an accessory is
attached.
User Guide 11
To Next Page
Loading...
Need help?
General
