Sequential PROPHET-600 - 2-6 LOAD FROM TAPE

2-6
LOAD
FROM TAPE
1. Insert tape and
rewind
to start.
2. Press
RECORD
3. If
loading only ten programs, press
appropriate PROGRAM SELECT once,
'f. Start recorder in play mode.
5. Press FROM TAPE.
6. If loading
sequences,
press
either
SEQ 1 or SEQ 2
(within
three seconds of FROM
TAPE).
7. When the FROM TAPE
LED
goes out, stop
the recorder. The Prophet-600
is
reprogrammed.
NOTE: A cassette is included which contains the
Factory Programs,
followed
by
two
demonstration sequences.
For more
information,
see Section 8.
CM600A
12/S2
2-3