II
FACTORY
PROGRAMS
The
Prophet-600 is shipped "ready-to-play," with 100
factory programs.
The programs
are numbered
from 00 through 99. You'll find an
extraordinary range of
instrumental
sounds
represented, including some "classics" from the
Prophet-5. Most of
these sounds
were programmed by
John Bowen, SCI's Product Specialist,
with some help
from the
SCI staff.
Figure
11-0 maps the locations of the programs
in memory, while the
remaining
diagrams
document specific programs. These control
diagrams are
included to encour-
age you to
familiarize yourself with the Prophet's
capabilities.
The factory
programs are not meant as absolutes but as
examples. The
programs
should
serve as starting
points for you to create your
own sounds. Program
editing is
often necessary to
"fit" the synthesizer into the specific
musical context.
Seeing how
the factory
programs are created makes it
easier
for
you to begin
editing the various
programs to suit
your particular needs and tastes. You
can always
restore the
Prophet-
600 to
its original
condition by loading the Factory
Programs through
the cassette
interface.
And as you invest time in custom
programs, be sure to protect
them through
cassette storage.
Notes under
each program diagram explain the
oscillator FREQUENCY knob
settings
(above 0), effects
available when the MOD wheel is
advanced, and any
other
information necessary to create the program.
CM600A 12/82
lt-1
To Next Page
Loading...
