5-2
PLAYBACK
1. To
playback a sequence,
press SCQ I
or SUQ 2.
2. The
playback
speed ran be varied From 1/4
lo
4X real-time. The SPEED knob
position for 1:1 playback speed is actually
lo the left
oF center. This provides more
control
range of higher speeds.
3. The
playback speed can also be programmed. As the sequencer is playing back, set
SPEED
as
desired, then
press the RECORD switch (which
will
not light). Now
whenever the sequence is selected
it
will
play at this
speed. The progommed
speed
can
be edited and rc-rccorded
(just like the synthesizer controls).
'*. To
stop,
press the
appropriate SEQ switch or the
footswitch-
5-2
CM600A 12/82
To Next Page
Loading...
