5. Press the second
digit, and the
program will be recorded or copied to that
location.
NOTE:
When recording,
be sure to hit the correct PROGRAM SELECT
switch or you may erase a program you wanted to keep.
6. When a PROGRAM SELECT switch
has been hit, the RECORD LED will go off and
the Prophet will return to either Preset or Manual Mode (whichever
preceeded Record
Mode).
7. After recording
a
program,
it is always a good idea to check that the program is
correctly recorded in the desired location
by
switching PRESET on.
6-*
CM600A 12/82
To Next Page
Loading...
