• Clicking the Start button instead of the Cancel button will
start the sampling program immediately. In other words, the
instrument will begin waiting for the start condition. If the
start condition has already been met, the instrument will
start sampling immediately.
• The instrument will display text to the terminal window as it
is running to confirm that it is running and to indicate where
it is in the sampling cycle. Once the program is confirmed to
be running and waiting for the correct start conditions, the
LISST-SOP program can be closed and the communications
cable can be disconnected. Be sure to replace the
connector cap before deployment.
To Next Page
Loading...
Need help?
General
