Sercel GRC ESP-Series User Manual

Doc No. 006-0211-00 Rev AD Page 36 of 62
11. A message will appear that indicates the binary file is ready to be transferred.
Click “OK”
12. Click “Store into SLCD” to begin transferring the file to the LCD. See Figure 33.
The SLCD status screen will indicate the file transfer as shown in Figure 34.
Figure 33. Transferring the firmware for the LCD.
Click “Store into SLCD” to
begin transferring the firmware
to the LCD

Sercel GRC ESP-Series Specifications

General

Brand	Sercel
Model	GRC ESP-Series
Category	Measuring Instruments
Language	English