Installation Instructions Section 2
2-16
Part Number 020003997 4/12
ADA Key Pad Matrix
Finish Installation
12. Put the splash panel and merchandiser back onto the
unit and reinstall the screws that hold them in place.
Restore power to the unit.
Starting Your Beverage System &
Dispenser
Upon completion of the beverage dispenser and / or
system installation, all tubing, dispenser, and system
components must be cleaned and sanitized prior to use.
NOTE: At installation, equipment, dispensers, and tubing
get moved through many environments, dirt, dust, chases,
insulation, drywall, etc. It is an important procedure and
best practice to address cleaning to deliver the best quality
drink to your customer.
12345 678910
123 456
Cubed Crushed
Cubed Crushed6 Valve Dispensers
12345678 910
1234 5678
Cubed Crushed
Cubed Crushed8 Valve Dispensers
12345 678910
12
10 Valve Dispensers
34 5 6 7 8910
Cubed Crushed
Cubed Crushed
Clean and sanitize the water and syrup circuits
according to instructions provided in this manual.
Clean and sanitize the dispenser components
according to instructions provided in this manual.
Seal to counter top when no legs are used with the
unit. Consult and use local health codes if a
discrepancy occurs between this manual and your
local health codes.
To Next Page
Loading...
