01440D Light Industrial Gas Analyser Service Manual.1.2
WARNING
• The electrical power used in this equipment is at a voltage high enough
to endanger life. Trained personnel should only perform servicing.
Service training is available from Servomex.
• Before carrying out servicing or repair the equipment should be
disconnected from the electrical power supply. Tests must be made to
ensure that disconnection is complete. Note that the relay contacts
may be supplied from a separate source of electrical power.
• It may be necessary to fault find with the electrical power connected.
Where this is necessary extreme caution should be exercised.
• The analyser may contain toxic, corrosive, flammable or asphyxiant
gases. Flush the analyser pipe work with clean dry air before
commencing work.
To Next Page
Loading...
