01440D Light Industrial Gas Analyser Service Manual. 3.1
3 SPARE PARTS LIST
The recommended quanitity of spares to be held in stock, is a guide only. The exact
requirement for spare parts will depend upon the reliance being placed upon the
analyser and the distance from Servomex or their agent
The following spares are required to maintain normal operation of the analyser.
WARNINGS
• 01440D1FTX and 01440D1STD spares must be supplied by Servomex
to comply with personnel safety requirements and to maintain
performance specification.
Table 3.1 Spares for Normal Operation
Part
Number
Description
Recommended qty.
No. of analysers
1-3 4-9 10+
S1400990 AC supply fuse kit.
10 off (T) 2A (Used in single
measurement units)
10 off (T) 3.15A (Used in dual
measurement units)
246
S1800985 AFCD filter element kit (10 off filters).
01440D1STD only.
122
2323-7029 Viton O’ ring for sealing filter element in
AFCD.
123
5984-7706 Back Pressure Regulator, if fitted.
01440D1STD only.
112
5981-0593 O’ ring for oxygen transducer, if fitted.
Two required per transducer.
2410
To Next Page
Loading...
