ECShell engineering software
Manual – ECC-DFC field bus controller
3. Click “Discover” in this window.
After you have clicked “Discover”, ECShell queries the network and displays a list
of all modules that it finds, including the IP address, the serial number, and the
current firmware of each module.
The auto configuration master is the module with node 20.
In this example, 3 modules were found. The auto configuration master has IP
address 10.10.10.20, its serial number is 268229, and it uses firmware version
4.13.
INFORMATION
You can find more information about the other tabs in the “Advanced Dialog”
window in the “Advanced Dialog” section.
To Next Page
Loading...
