SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 - Page 177

10
Technical data
Hybrid cable type "D"
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
177
10.13.2 Properties
All cable types have the following properties:
• Maximum 600V operating voltage for all cores
• Approved according to European and American standards
• Suitable for cable carriers
– Bending cycles > 5 million
– Travel speed ≤ 3ms
-1
– Min. bending radius: 10× cable diameter
• Minimum bending radius for fixed installation: 5× cable diameter
• Resistance against oil according to VDE0250 part407
• General resistance to acids, alkalis, cleaning agents
• General resistance against dusts (e.g. bauxite, magnesite)
• Insulation and sheath material halogen-free
• Within the specified temperature range, free from substances interfering with wet-
ting agents (silicone-free)
• Flame retardant according to VDE 0472 part 804 (method B IEC 60332‑1)
• Temperature range for processing and operation:
Fixed installation Cable carrier installation
-40°C – +90°C (current-carrying ca-
pacity to DINVDE0298-4)
-5°C – +90°C (current-carrying capaci-
ty to DINVDE0298-4)
-30°C – +80 °C according to UL758 -5°C – +80 °C according to UL758
• Temperature range for transportation and storage:
– -40°C – +90°C (current-carrying capacity to DINVDE0298-4)
– -30°C – +80 °C according to UL758
26596598/EN – 10/2020