SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 - Page 35

3
Device structure
Function units
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
35
Brake control
The brake control system is responsible for the power supply and control of the disk
brakes of the connected motors. The following brake voltages are possible:
Brake from
SEW‑EURODRIVE
Brake voltage Function unit
AC230V DC96V PFA‑MD‑..B‑..‑..23‑../../000
AC400V DC167V PFA‑MD‑..B‑..‑..40‑../../000
AC460V DC190V PFA‑MD‑..B‑..‑..46‑../../000
Motor types
The device supports the following motor series from SEW‑EURODRIVE:
• DRE..
1)
• DRU..
1)
• DRS.. • DRP..
• DRN.. • CM..
1) Synchronous gearmotors with LSPM technology DRE..J and DRU..J are not supported.
26596598/EN – 10/2020